Meter Overview

METER OVERVIEW

This System is intended for use outside the body (in vitro diagnostic use) by people with diabetes at home and by healthcare professionals in clinical settings as an aid to monitoring the effectiveness of diabetes control. It is intended to be used for the quantitative measurement of glucose (sugar) in fresh whole blood samples (from the finger, palm, forearm, upper arm, calf and thigh). It should not be used for the confirmation of diagnosis of diabetes, or testing on newborns. Professionals may test with capillary and venous blood sample; home use is limited to capillary whole blood testing.

 

TEST PRINCIPLE.

Your system measures the amount of sugar (glucose) in whole blood. The glucose testing is based on the measurement of electrical current generated by the reaction of glucose with the reagent of the strip. The meter measures the current, calculates the blood glucose level, and displays the result. The strength of the current produced by the reaction depends on the amount of glucose in the blood sample.

  1. Display Screen
  2. Test Slot: Insert test strip here to turn the meter on for testing
  3. M Button: Enter the meter memory and silence a reminder alarm
  4. Data Port: Download test results with a cable connection.
  5. SET Button: Enter and confirm the meter settings.
  6. Battery Compartment.